The Unicycle.com hub features a hardened spindle with steel flanges. This hub is a classic and is time tested proving to be solid and dependable.
Includes a pair of high tensile strength bolts and 17 x 40mm double seal bearings.
- Uses 40mm bearings.
- Center Flange to center flange distance is 71mm.
- Flange OD is 66mm. Flange width is 3mm.
- Center bearing to center bearing spacing is 100mm.
- The wider the space between flanges, the stronger the wheel. These flanges are much farther apart than those on most hubs. If you are not sure contact us before ordering.
- Includes a pair of high tensile strength bolts and 17 x 40mm double seal bearings.
- Flange Diameter: 56.2mm
- Hub Width: 71.5mm
- Spoke hole diameter: 2.8mm
- Hub Drilling: 36
- Spoke Interface: J-Bend
Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.
Should you want to build the wheel, here is a link to the spoke calculator so you can find the correct spoke length you need.