A super hard cotterless hub specially produced by Unicycle.com, with wide flange spacings for a super strong wheel. The wider the space between flanges, the stronger the wheel. These flanges are spaced farther apart than any other hub currently in production. Not compatible with Coker unicycle frames.
Includes a pair of high tensile strength bolts and 17 x 40mm double seal bearings.
- The measurement from center bearing to center bearing is 125mm.
- Center Flange to center flange distance is 100mm
- Flange OD is 56mm. Flange width is 3mm.
- The measurement from outside bearing to outside bearing is 140mm.
- Spoke holes are for 14 gauge spokes.
- Overall width, end to end is 180mm.
- Flange Diameter: 56mm
- Hub Width: 98.5mm
- Spoke hole diameter: 2.8mm
- Hub Drilling: 36
- Spoke Interface: J-Bend
Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.
Should you want to build the wheel, here is a link to the spoke calculator so you can find the correct spoke length you need.