Site Information

 Loading... Please wait...
  • Image 1

Unicycle.com 36H Chromoly Hub

$30.00
Quantity:

Product Description

A new super hard cotterless hub specially produced for Unicycle.com, with wider flange spacings for a much stronger wheel.
Center Flange to center flange distance is 71mm. Flange OD is 66mm. Flange width is 3mm. Center bearing to center bearing spacing is 100mm.

Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.



Should you want to build the wheel, here is a link to the spoke calculator so you can find the correct spoke length you need.

  • Uses 40mm bearings.
  • Center Flange to center flange distance is 71mm.
  • Flange OD is 66mm. Flange width is 3mm.
  • Center bearing to center bearing spacing is 100mm.
  • The wider the space between flanges, the stronger the wheel. These flanges are much farther apart than those on most hubs. If you are not sure contact us before ordering.
  • Includes a pair of high tensile strength bolts and 17 x 40mm double seal bearings.

    Hub detail:
  • Flange Diameter: 56.2mm
  • Hub Width: 71.5mm
  • Spoke hole diameter: 2.8mm
  • Hub Drilling: 36
  • Spoke Interface: J-Bend

    Note: This hub utilizes 40mm bearings, and is compatible with 40mm frame/bearing housings.

Specifications

Bearing Size:
17x40x12mm
Number of Spokes:
36 Hole
Type - Bearings:
6203-2RS
Write Review

  1. Replacement Hub works in Sun 29er 4 Star Review

    Posted by on Feb 20th 2017

    Just transferred the rim and spokes from a Sun 29er unicycle wheel with no problems, wider hub OK, ticked frame a little but the spoke bends are tightening up and no longer ticking. Broke Sun hub, one sq. drive sheared off.

Click the button below to add the Unicycle.com 36H Chromoly Hub to your wish list.