Built to be more robust and durable than the traditional cotterless, or non ISIS splined hubs. Compatible with 2007-2008 48 hole rims featured on the Nimbus II 20" & 24" ISIS cycles, Nimbus X 20" & 24" ISIS cycles, and all 42mm bearings and 42mm machined frame housings.
Note: This hub utilizes 42mm bearings, and is compatible with 42mm frame/bearing housings only.
Should you want to build the wheel, here is a link to the spoke calculator so you can find the correct spoke length you need.
- ISIS spline is strong and creak free
- Tempered 4130 CrMo spindle
- Wide flange spacing for increased wheel strength
- Flange material hardness and shape are designed to maximize spoke strength
- Sealed, 42mm bearings with standard 100mm spacing included
- 48 spoke holes
- Comes with pair of ISIS bolts
- Weighs: 1.4 lbs (including bolts and spacers)
- Flange Diameter: 56.2mm
- Hub Width: 71.5mm
- Spoke hole diameter: 2.8mm
- Hub Drilling: 48
- Spoke Interface: J-Bend
These will fit all ISIS cranks except Koxx ISIS cranks.
Note: this hub will not fit in frames with machined bearing housings designed for 40mm bearings. It requires either pressed bearing housings or frames machined to take these larger bearings.