The latest generation Exceed Titanium Hub with the perfect sized flanges. The ultimate in superlight weight hubs. Designed by Impact and designated as an Exceed product.
Note: This hub utilizes the 22mm x 32mm double bearing design, and is compatible with 32mm frame/bearing housings only.
Should you want to build the wheel, here is a link to the spoke calculator so you can find the correct spoke length you need.
- ISIS spline is strong and creak free
- Super strong Titanium construction - Ti-6A-4V (64T)
- Small flanges but still big enough for good wheel strength (Larger than previous version)
- Flange material hardness and shape are designed to maximise spoke strength.
- Comes with sealed 42mm bearings, 32mm bearings and both spacer sets.
- 100mm bearing pitch
- 36 spoke holes
- Comes with pair of ISIS bolts & Spacers
- Weighs: 207g (ex bearings)
- Hub flange width (W) = 60.0mm
- Hub flange Diameter (D) = 36.8mm
- Hub hole Diameter (S) = 2.8mm
- Hub Drilling: 36
- Spoke Interface: J-Bend
These will fit all ISIS cranks except Koxx ISIS cranks.
Note: this hub will not fit in frames with machined bearing housings designed for 42mm bearings. It requires either replacing the bearing or buying a new frame machined to take these wider bearings.